Custom Silicone Mold for a Branded Ice Cube Tray

The logo reads at room temp and disappears after freeze-expand. Ice is a food-contact quote when the cube is edible. We will not sell a craft tray as a bar cube tool.

RUUIPON cuts custom silicone molds in Shenzhen since 2018 for brand and Shopify buyers, not kitchen DIY kits. MOQ 20 trays per design. Complete RFQs typically get a reply in about 24 hours. Prototype is commonly 3-7 business days after CAD lock. Drawing deposit ~$50 USD when we must model cavities.

Freeze Expand Washes Shallow Logos

This section is the failure mode we see on restock, not a keyword definition. If the first sample looked fine, wait until cavity 8-20 before you approve a production sheet.

Edible Ice Is a Food-Contact Quote

Input	What it does to the tray
Logo 0.3 mm	Gone after freeze
Logo 0.8-1.2 mm	Usual bar read
Craft compound on ice	Wrong quote path
Stack 10 trays	Call wall stiffness

FDA 21 CFR 177.2600 / LFGB sections 30/31 may apply depending on material and market. We do not say FDA-approved factory.

Stack Height vs Bar Speed

Do not reuse a Shore band from a different fill. Platinum-cure is the default production sheet. Shrink is compensated in CAD (~0.1%) when you send a solid. We do not lock a marketing cycle-life number.

Ice Tray RFQ

Cube OD, logo, destination market, weekly trays.

food-grade silicone molds. buyer spec.

FAQ

Cocktail smoke ice vs hotel ice?
Same food path; cavity OD differs. Spec both.

MOQ 20?
Yes.

Can you copy a silicone ice brand?
No.

Quote: contact or WhatsApp +86 135 3006 2969.