Custom Silicone Mold for Incense Cone Cavities

You poured a cone like resin and it crumbled, or you pressed powder into a resin cavity and it ovaled. Incense cones are a press/pour split plus a base that actually stands.

RUUIPON cuts custom silicone molds in Shenzhen since 2018 for brand and Shopify buyers, not kitchen DIY kits. MOQ 20 trays per design. Complete RFQs typically get a reply in about 24 hours. Prototype is commonly 3-7 business days after CAD lock. Drawing deposit ~$50 USD when we must model cavities.

Cones That Will Not Stand

This section is the failure mode we see on restock, not a keyword definition. If the first sample looked fine, wait until cavity 8-20 before you approve a production sheet.

Press vs Pour

Input	What it does to the tray
Point too sharp	Crumble
Base too small	Tip over
Resin Shore on powder press	Oval
MOQ 20	Per design

Craft brand SKUs. We will not invent burn-time claims.

We Do Not Quote Burn Performance

Do not reuse a Shore band from a different fill. Platinum-cure is the default production sheet. Shrink is compensated in CAD (~0.1%) when you send a solid. We do not lock a marketing cycle-life number.

Cone RFQ

Press or pour, height, base OD, weekly cones.

contact. quote.

FAQ

Backflow cone holes?
That is a second geometry. Spec the hole.

MOQ?
20.

Same as crayon melt?
No.

Quote: contact or WhatsApp +86 135 3006 2969.