Custom Silicone Mold for Petit Four Cavities
Petit fours that glue in sharp corners. Draft, Shore, food, MOQ 20 for pastry brands.
Kyler Yang · Founder12 min read
Sharp inside corners that look 'luxe' in CAD glue glaze and tear the crumb. Petit four cavities need draft you can live with in a pastry case photo.
RUUIPON cuts custom silicone molds in Shenzhen since 2018 for brand and Shopify buyers, not kitchen DIY kits. MOQ 20 trays per design. Complete RFQs typically get a reply in about 24 hours. Prototype is commonly 3-7 business days after CAD lock. Drawing deposit ~$50 USD when we must model cavities.
Glaze Glue in Sharp Corners
This section is the failure mode we see on restock, not a keyword definition. If the first sample looked fine, wait until cavity 8-20 before you approve a production sheet.
Draft vs Case Photography
| Input | What it does to the tray |
|---|---|
| 0 deg corner | Glue |
| 1-3 deg | Usual |
| Chocolate lining vs sponge | State fill |
| MOQ 20 | Per design |
Pastry brand lane. Quote ~24h.
Food-Contact
Do not reuse a Shore band from a different fill. Platinum-cure is the default production sheet. Shrink is compensated in CAD (~0.1%) when you send a solid. We do not lock a marketing cycle-life number.
Petit Four RFQ
Cavity OD, fill, whether you freeze in the tray.
FAQ
Frozen vs fresh?
State it. Demold temp changes.
MOQ?
20.
Same as chocolate bonbon?
No.
Quote: contact or WhatsApp +86 135 3006 2969.
Ready to order custom silicone molds?
Free quote for OEM/ODM projects. MOQ 20 · Prototype 3-7 days · FDA/LFGB available.