Character Candle Mold: Horns and Arms Set the Split

The channel short is titled as a bear candle. The frame shows a standing wax character: small horns, a snout, arms, and a shape held across the chest. The overlay says the pour does not leak and the demold is undamaged. Those lines are captions. They do not choose the split.

If the only question is the outline, use the brand candle silhouette page. Seam flash and a locked undercut are separated on the candle seam-line guide. This page is the arms and the horns.

What the Frame Shows

The still at the top is one frame from that short. The character is full-3D, not a flat-back pillar. Horns leave the head. The arms leave the torso. Something sits across the chest, and the hands close around it. Pink and blue pours sit behind it. None of that is a Shore reading, a wax temperature, or a count of how many times the mold has opened.

Where the Split Sits

On the RUUIPON Mold Structure Decision, a flat back with mild draft can peel open-back. This character fails that test. The rubber has to pass the horns, clear the arms, and leave the held shape. A one-piece glove that only stretches tears at the elbow or smears the face.

A planned slit usually runs on the back or the side, so the seam misses the face and the chest. A keyed two-part is the other talk when the held object locks from both directions. A mother mold sits outside the skin only if the wet wax column sags the cavity while it cools. We would not raise Shore so an empty mold looks stiff on camera and then hope the arms still peel.

Typical Shop Checks

Typical shop values. Talk ranges, not readings from the short.

Check	What we use in talk	What the clip does not prove
Open pillar	Shore A 20-30 is a common starting band	This character is not that geometry
Horns, arms, held shape	Slit or keyed split before a Shore bump. A peel band is often 15A-25A when the face has to stretch	The grade poured in the video
Platinum linear shrink	Often about 0.1-0.3%	That shrink made the snout sharp
Held object	Parting planned around the hands	That every pour leaves the hands clean

A hard pillar blend and a soft container wax do not leave the same undercut. Send the wax. Do not send the temperature slogan from the overlay.

Captions That Stay Off the Quote

We would not put these on a quotation:

• "Pouring wax without spilling or leaking" is not a closure spec. Leak follows the pour lip, the fill height, and whether the split is clamped.
• "The demolding is complete and undamaged" is one still. It is not an inspection record.
• "Withstand high temperatures without deformation" is not a rating for your wax blend.
• "Even beginners can make beautiful candles" is not a process.
• A candle tray is not a food-contact tool because the overlay says silicone.

RUUIPON pours the RTV tool in Bao'an, Shenzhen, and has since 2018. Production is MOQ 20 pieces per design. Simple 3D is USD 50 when that CAD scope applies. A prototype is 3-7 business days after CAD lock.

What to Send

1. Front, side, and back, or a file, with height and the widest point including horns and elbows.
2. Where the face is, and where a seam may sit.
3. Wax type.
4. Whether a wick has to stay on center. That cut is wick hole design.
5. Prototype quantity, then production quantity.

The product page is custom silicone candle molds. Shop scope is the Shenzhen manufacturer page.

Frequently Asked Questions

Is the candle in the video a bear?

The title says bear. The frame we are using shows horns, a snout, arms, and a held shape. Send the candle you actually want. We do not build the mascot from the title.

Can this be a one-piece mold?

Only if every horn, arm, and held edge peels without a tear. Most full-3D characters do not.

Will a harder silicone save the arms?

Harder rubber usually makes that peel worse. The slit comes first.

Do the pink and blue candles mean you stock those colors?

No. Color in the background is a sample pour, not a catalog.

Can you start from this still?

A still is enough to see the undercuts. Dimensions still have to arrive before the split is locked.