Industrial Silicone Parts
Industrial silicone *parts* - gaskets, boots, bumpers, bellows, insulation pads - are compression or LSR articles. An RTV cavity you fill with resin, plaster, concrete, or food is a different object. A 70A HCR pad is quoted as a molded article, not as an RTV pour cavity.
Send the drawing or sample, intended use, material requirements and expected quantity. RUUIPON will review the manufacturing route, tooling scope and inspection needs before confirming the quotation.
Common mix-up
A concrete *mold* and a silicone *gasket* both say industrial. One is a cavity. The other is the part. Don't put flash-land language on a jacket quote.
Typical shop values
| Object | Who quotes | Typical process |
|---|---|---|
| RTV mold for PU / plaster / cement | RUUIPON | resin master to RTV casting mold |
| Industrial silicone *part* | HTV product RFQ here, or ask us | HCR compression (often) or LSR |
Reference values only. Confirm material-specific limits against the supplier’s technical data and agree project acceptance criteria before production. Geometry can override: a one-off sculpture mold stays RTV.
Quoted as a molded silicone article
This page quotes a molded silicone article, not an RTV casting cavity. We would not recommend using mold MOQ 20 as the industrial-parts MOQ. This page does not present a finished-goods catalog for that article.
Path: RTV mold vs finished part
- What ships? - gasket, boot, bumper, pad -> HTV product or mold RFQ
- Stay on RUUIPON: /contact/ -> MOQ 20 / $50 CAD when in scope / 3-7 days after CAD lock
- HTV product or mold RFQ -> MOQ, tooling cost and lead time are confirmed for the selected process, design and production quantity. RTV casting-mold terms do not apply automatically to finished silicone products.
Where to send the RFQ
Parts: section, Shore, environment, annual qty - send an HTV product RFQ here.
Molds: contact · PU/resin molds · plaster · concrete.
Send the drawing or sample, intended use, material requirements and expected quantity. RUUIPON will review the manufacturing route, tooling scope and inspection needs before confirming the quotation.
FAQ
Do you mold industrial silicone gaskets here? Yes as an HTV product RFQ. High-volume LSR: ask us. RTV cavities for PU, plaster, or cement stay on the pour table.
I need a mold to cast concrete pavers. That's an RTV mold on this site. Don't send it to the parts cell.
301? Send the part drawing and intended use so the manufacturing route can be confirmed.
RUUIPON mold numbers? MOQ 20, $50 modeling when in scope, 3-7 days after CAD lock.
Compression or LSR for an 8 mm 70A pad? Ask an HTV product or mold RFQ here, or ask us if you need a high-volume LSR cold-runner tool. Chunkier HCR often stays compression; don't guess from this RTV page.