Silicone molds for CBD gummies: tooling only, no dosing claims

This page is a mold RFQ, not a cannabinoid product page. We pour platinum RTV gummy trays to a stated piece weight, Shore, and food-contact path. We do not formulate CBD, dose milligrams, or make medical claims. If your SKU must weigh 4.0 g, we size the cavity from volume and formula density, then jacket the sheet so outer-row pieces don't run 3-6% heavy when a loaded tray sags 0.5-1.5 mm. RUUIPON has poured food-contact RTV tools in Bao'an since 2018: resin master to RTV casting mold. Prototype in 3-7 business days after CAD lock. MOQ 20 pcs/design. 21 CFR 177.2600 is extraction of the article, not an FDA-approved factory. Formula family still matters - pectin vs gelatin. Hub: gummy molds. Vitamin trays (also no dosing claims): vitamin gummies.

What the mold shop will and will not quote

Will quote: cavity volume, tray envelope, jacket, Shore band, compound-matched food docs for the market you name, recast against the unsanded master. Will not quote: milligrams of CBD per piece, bioavailability, legal status in your destination, or any therapeutic claim. Put those on your own label review.

Sticky pectin still stretches a soft tray. Don't freeze a gelatin Shore onto a pectin CBD SKU without a dump test. Depositor pitch comes from the machine drawing, not a photo - depositor-compatible.

Food-contact is the article

Name US / EU / both. A generic "food grade" badge that doesn't match the compound is a fail. Color is part of the article.

When this CBD-tray advice does not apply

If you need us to design a dose, stop - wrong vendor. Steel high-volume *part* tools → an HTV product RFQ here. A one-cavity test can skip multi-cavity. Geometry can override quantity: a locked mascot still needs draft. We don't advise on cannabis licensing.

If you only have photos, custom 3D modeling is USD $50 when that scope applies.

CBD-gummy tooling RFQ to copy

• Process: platinum RTV food-contact tray - tooling only
• Target grams; pectin vs gelatin
• No milligram/dosing fields for the mold shop
• Cavity count; tray size; fill method
• Jacket yes/no
• Market; 177.2600 / LFGB on this compound
• Custom 3D modeling: USD $50 when that scope applies
• Prototype weigh-map, then MOQ 20 pcs/design

Send grams, formula family, and tray envelope to contact ([email protected] / +86 135 3006 2969). Licheng Technology Industry Park, Xinhe Blvd, Shajing, Baoan.

Matched CTA: Send target grams and pectin vs gelatin for a tray review. We will not quote a dose.

We would not recommend asking the mold shop to certify a milligram dose

We would not recommend medical or wellness claims on this page. We would not skip outer-row weights. We would not call 177.2600 a factory approval. We would not freeze depositor pitch from a photo.

RUUIPON Mold Structure Decision: tooling grams first. Open-back if draft peels. Loaded tray? jacket. Steel or LSR part tools? Ask us. Dosing? not this factory.

Typical shop values

Reference values only. Confirm material-specific limits against the supplier’s technical data and agree project acceptance criteria before production.

FAQ

Can you make a mold for a 10 mg CBD gummy? We can tool a cavity to an agreed *gram* weight. Milligrams of an ingredient are your formula. We don't certify a dose.

Do you sell CBD or advise on legality? No. We sell RTV molds. Regulatory status of your finished food is your file.

Is the factory FDA-approved for cannabis? No. We are not an FDA-approved factory. 21 CFR 177.2600 is extraction of the rubber article.

Is pectin or gelatin the default? Neither. Name the dump. Peel and jacket change with stick.

Do I need a prototype? For a new 4 g tray, yes. 3-7 business days after CAD lock. Weigh every pocket.